Nikon FM2 Instruction Manual page 15

22
Rewind the film.
• Lift the film rewind crank and
turn it in the direction of the arrow. At the
end of film rewind , you will feel a slight
resistance. Continue winding one or two
more turns until the crank feels lighter ;
this will indicate that the film leader is
now fully rewound into the cartridge.
23
Remove the film
• cartridge.
Push the camera back lock lever in the
direction of the arrow as you lift the film
rewind crank to open the camera back.
Take out the film cartridge. Avoid unload-
ing film in direct sunlight.
24
Put the film advance
• lever back into place.
Close the camera back and push the film
advance lever into place. When you 're
not using the camera, you should set the
film advance lever to this position which
locks the shutter release button and
keeps the exposure indicator lamps in-
side the viewfinder switched off even if
the shutter release button is accidentally
pressed.
Note:
Even if the exposure indicator lamp is lit,
it will automatically be switched off in approx.
30 sec. , and the exposure measuring circuit
will simultaneously be cut off.
15