Day& Night - EverFocus EQ-2250 Installation & Operation Manual

Table of Contents

Advertisement

3 CAMERA SETUP
3.3.3.5 DAY& NIGHT
MODE
DETECT MODE
DWELL TIME
D>N LEVEL
D<N LEVEL
BURST
ATTENTION:
This camera is equipped with a fixed IR-cut filter. For this
reason the camera is not applicable for installations with IR illumination.
D&N AUTO
MODE
DETECT MODE
DWELL TIME
D>N LEVEL
D<N LEVEL
BURST
RETURN
AUTO: Automatic day/night switching
COLOR: day / color mode
BW: night / b/w mode
EXTERNAL: Switching by external contact
VIDEO: In mode AUTO the D/N switching is controlled by
video signal level
SENSOR: not supported mode
Delay time for switching 1~60 s
Sensitivity trigger level for switching day to night, range
0~255
Sensitivity trigger level for switching night to day, range
0~255
ON: color burst in video signal also in b/w mode
OFF: color burst in video signal in b/w mode off
AUTO
VIDEO
···l······ 5
······l··· 176
····l····· 76
ON
2 1

Advertisement

Table of Contents
loading

Table of Contents