Table of Contents
Advertisement
OVERVIEW OF HIGH VOLTAGE COMPONENTS
1.
Battery
2. DC-DC converter
3. High voltage cabling (colored orange)
4. 10 kW on-board master charger
5. Drive unit
6. Charge port
7. OPTIONAL: 10 kW on-board slave
charger
WARNING: After deactivation, the high voltage circuit requires two minutes to deplete.
WARNING: The SRS control unit has a backup power supply with a discharge time of approximately ten seconds.
WARNING: Regardless of the disabling procedure you use, ALWAYS ASSUME THAT ALL HIGH VOLTAGE COMPONENTS ARE ENERGIZED! Cutting, crushing or touching
high voltage components can result in serious injury or death.
3
Advertisement
Table of Contents
