CUTTING THE FIRST RESPONDER DISCONNECT POINT - REAR PILLAR (NEWER
MODELS ONLY)
STEP 1: Open the rear passenger door closest to the charge port.
The disconnect point is located under the body panel on
the outside of the seat. The label indicates where to cut
into the body panel.
WARNING: Regardless of the disabling procedure you use, ALWAYS ASSUME THAT ALL HIGH VOLTAGE COMPONENTS ARE ENERGIZED! Cutting, crushing or touching
high voltage components can result in serious injury or death.
STEP 2: Use a 12" circular saw to cut 6 in (152 mm) through the
label and into the pillar.
Cut loop
label
13