(up) until the outboard motor is support-
ed by the tilt rod and the tilt support lever
becomes free.
2.
Release the tilt support lever.
3.
Push the power trim and tilt switch "
(down) to lower the outboard motor to
the desired position.
UP
DN
DN
DN
EMU28061
EMU32851
ZMU03453
Power trim and tilt models
The outboard motor can be tilted up partially
"
to allow operation in shallow water.
ECM00260
NOTICE
Do not tilt the outboard motor up so that
the cooling water inlet on the lower unit is
above the surface of the water when set-
ting up for and cruising in shallow water.
Otherwise severe damage from overheat-
ing can result.
EMU32922
Procedure for power trim and tilt models
1.
Place the remote control lever in neutral.
ZMU01936
ZMU04603
Operation
DN
Shallow water
ZMU03524
55