Checking Power Trim And Tilt System - Yamaha 150F Owner's Manual
Hide thumbs
Also See for 150F:
- Owner's manual (229 pages) ,
- Service manual (46 pages) ,
- Owner's manual (76 pages)
Table of Contents
Advertisement
EMU29158
Checking power trim and tilt system
EWM01930
WARNING
Never get under the lower unit while it
●
is tilted, even when the tilt support lever
is locked. Severe injury could occur if
the outboard motor accidentally falls.
Body parts can be crushed between the
●
motor and the clamp bracket when the
motor is trimmed or tilted.
Be sure no one is near the outboard
●
motor before performing this check.
1.
Check the power trim and tilt unit for any
sign of oil leaks.
2.
Operate each of the power trim and tilt
switches on the remote control and en-
gine bottom cowling to check that all
switches work.
3.
Tilt the outboard motor up and check
that the tilt rod and trim rods are extend-
ed completely.
2
ZMU04679
1. Tilt rod
2. Trim rods
4.
Use the tilt support lever to lock the mo-
tor in the up position. Operate the tilt
down switch briefly so the motor is sup-
ported by the tilt support lever.
1. Tilt support lever
5.
Check that the tilt rod and trim rods are
free of corrosion or other flaws.
6.
Activate the tilt-down switch until the trim
rods have retracted completely into the
cylinders.
Operation
1
ZMU03458
1
ZMU03459
39
Advertisement
Table of Contents
