Table of Contents
Advertisement
6.12
Deregister a Handset and Headset
1.
Before deregistration, make sure the handset and headset are not on the base or
charger cradle.
2.
Press and hold
base turns on and flashes.
3.
Release
then press it again immediately. You must press
on the base is still flashing. The deregistration process takes up to 10 seconds.
4.
If the deregistration of handset and headset are successful, all the handsets screen
will show "to register HS, see manual"; the headset LED will turn purple steadily,
and you hear the relevant voice message when pressing the tALK on button.
NOTES
•
If the handset deregistration failed, you may need to reset the system and then try
again. To reset the system, unplug the telephone base power adapter, and then plug it
back in.
•
If the headset deregistration failed, you may need to reset the headset and then try
again. To reset the headset, use the paper clip or similar objects to insert into the reset
button on the back of the headset.
•
You cannot deregister the handset that you are currently using.
•
Even if the battery is depleted, you still can deregister the handset by following the
above steps. When the handset charges for at least 10 minutes, the screen will show
"to register HS, see manual".
on the base for about 10 seconds, until the
34
indicator on the
when the
indicator
Advertisement
Table of Contents
