Table of Contents
Advertisement
2.
Press reDIAL to access the redial list.
3.
Press
or
4.
Press
to dial the selected redial number.
NOTE
If there are no numbers in the redial list, the screen shows "redial empty".
4.13.2 Store a number from redial List into the Directory
1.
Follow Steps 1 and 2 in the section of redial a number from the redial List.
2.
Press
then use the keypad to edit the number if necessary.
3.
Press
then use the keypad to enter the name.
4.
Press
.
NOTE
If the redial number you need to store already exists in the directory, the screen shows
"number already saved".
4.13.3 Delete a number from redial List
1.
Follow Steps 1 and 2 in the section of redial a number from the redial List.
2.
Press DeLete.
4.14
find the Handset (pAGInG)
Paging is a useful way for finding lost handset(s).
1.
Press
on the base. All the registered and available handsets will play the paging
tone and display "** paging **". All the registered headsets will also play the paging
tone and the LED flashes.
2.
Press
,
or any keys (0-9, * or #) on the handset, the tALK off button on
the headset, or on the base to stop paging.
NOTES
•
If there is an incoming call during paging, the paging stops and the handset and
headset will ring.
•
You can press
paging process.
•
If there is no any action after 60 seconds, the paging stops.
4.15
Join a call in progress
When a handset is on an external call, another handset or headset can join it. The call
continues until all the devices hang up.
Press
or
on the handset to join the external call.
or
Press tALK on on the headset to join the external call.
or reDIAL repeatedly to select the desired redial number.
or MUte on the handset to silence the paging tone during the
22
Advertisement
Table of Contents
