Table of Contents
Advertisement
2.3 LED & Button definition
LED
Color
Green
PWR
Off
DIAG
Amber
WAN/DMZ
Green
LINK/ACT
LAN
Green
LINK/ACT
Green
LAN/
WAN/DMZ
Amber
Speed
Off
Button
Action
Press for 5 Secs
Reset
Press Over 10 Secs
2.4 Placement
Make sure the device is placed in a safe environment to avoid equipment failure.
DO NOT place anything on top of the device. Excessive weight could damage it.
l
DO NOT obstruct ventilation slots on each side of the router or expose it to
l
direct sunlight or other heat source. Be sure that there is adequate air flow
around the router.
Place the router on a flat surface to avoid any damage.
l
Status
Steady
Power On
Off
Power Off
Steady On
System is crashed.
System is on self-test after power on the
Blinking
device.
Off
System is ready.
Steady On
Port has been connected & gets IP.
Blinking
Transmit data.
Not get the IP address, even the port has
Off
been connected.
Steady On
LAN port has been connected.
Blinking
Transmit data.
Steady On
Works on 1000Mbps.
Steady On
Works on 100Mbps.
Off
Works on 10Mbps.
Warm Start
DIAG indicator: Amber LED flashing slowly.
Factory Default
DIAG indicator: Amber LED flashing quickly.
Description
Description
5
Advertisement
Table of Contents
