Configuring The System Os - Gateway GT110 Series User Manual

18

Configuring the system OS

The GT110 comes with Gateway Smart Setup that allows you to
conveniently install the preferred operating system. To start using Gateway
Smart Setup, follow the steps below.
1 Locate the Gateway Smart Setup DVD included in the system
package.
2 With the system turned on, press the DVD-ROM drive Eject button.
3 When the disc tray slides open, insert the Gateway Smart Setup DVD
with the label side of the disc facing upward.
Note: When handling the disc, hold it by the edges to avoid smudges
or fingerprints.
4 Press the drive Eject button again to close the disc tray.
5 The Gateway Smart Setup sequence begins. Follow all onscreen
instructions.
For more information, refer to the Gateway Smart Setup Installation guide.
Note Gateway Smart Setup only supports the Microsoft and Red Hat
Linux operating systems. The Windows or Red Hat installation disc(s)
is required to install the OS.
2 System setup