7
FAULT DIAGNOSTICS
7.1
Controller / module with display
Customer complaint
Cause
Running time too long
Alternating rinse technology, energy saving
Component is not actuated
Triac on the module
may be visible on the module
Time skips
Washtecnic. Adjust the time in the display to the actual
wash step.
202_58300000104305_ara_en_b – 02.11.a
does not switch properly, smoke traces
Remedial action
Advise customer,
See Consumption rates
rinsing technology
Before replacing the module, always measure
the connected consumers (valves, actuators, etc.).
Comply with safety instructions
Advise customer. There are some factor that have
influence: water temperature, amount of utensils,
degree of dirt on the utensils...
or
Alternate
Seite 42 von 56