Modes Of Operation - Nx61, Nx81; Start Up; Shut Down; Table 4: Nx61, Nx81 Operation Modes - Norcold NX61 Service Manual

NORCOLD
30 - Power On/Off Button
31 - Mode Button
32 - Temperature Set Button

Start Up:

Before Ignition or Start Up:
• Make sure the air fl ow in the lower intake vent, through
the refrigerator coils and condenser, and out the upper
exhaust vent is not blocked or decreased.
• Make sure there are no combustible materials in or
around the refrigerator.
If the gas does not ignite within 30 seconds, the gas
valve of the refrigerator will automatically close and the
POWER ON indicator [185] will come on solid red. To
reset the controls, press and hold the POWER ON/OFF
button [30] for 1 second to turn the refrigerator off and
then press it again to restart the refrigerator.
1. Push and release the POWER ON/OFF button [30].
2. Select the mode of operation.
• Push and hold the MODE button [31] to scroll
through the available operation modes of the
refrigerator, one after the other.
• Or push and release the MODE button again and
again to change the available operation modes of
the refrigerator, one at a time.
• As you change the mode, the applicable mode
indicator(s) [277], [278], and [279] will come on.
• Select one of three (3) modes of operation:
Mode Meaning
AUTO The refrigerator's electronic control
mode automatically select the most
effi cient energy source that is
available. The Auto mode indicator
[277] comes on and either the AC
mode indicator [278] or the gas
indicator [279] comes on also.
MANUAL The refrigerator cools using only
AC mode AC electric power as the power
source. The AC mode indicator
[278] comes on only.
MANUAL The refrigerator cools using only
GAS mode propane gas the power source.
The gas mode indicator [279]
comes on only.

Table 4: NX61, NX81 Operation Modes

54
NX6 / NX8 / NXA Models

MODES OF OPERATION - NX61, NX81

30 185 31
MODE

Fig. 43 - NX61, NX81 Display Board

www.norcold.com/cda
277 278 32
279
A
COLD
185 - Power On Indicator
277, 278, 279 - Application Mode Indicator
289 - Temperature Setting
3. Select the temperature setting.
• Push and hold the TEMPERATURE SET button
[32] to scroll through the temperature settings, one
after the other.
• Or push and release the TEMPERATURE SET
button again and again to change the temperature
settings, one at a time.
• As you change the temperature setting [289], the
applicable temperature indicator(s) will come on.
Select one of three (3) temperature settings:
• Cold One temperature indicator comes on.
• Colder Two temperature indicators come on
• Coldest Three temperature indicators comes
on.

Shut Down:

To shut down the refrigerator, push and hold the POWER ON/
OFF button for one second and then release.
289
COLDEST
Art02393
Refrigerator Service Manual