Motorola CDM1550-LS+ User Manual page 81

2 ) to enter menu mode.
3KRQH
3 y or z until
3KRQH
4 ) to select
D appears on the display when you are
in Phone Mode.
5 (For conventional operation with auto
access only). You hear a series of tones,
indicating that an access code is being
sent automatically, and see your access
code:
–or–
Enter your access code using the DTMF
microphone keypad.
6 When you hear a dial tone:
;;; - ;;; - ;;;;
Enter the phone
number using the
DTMF microphone
keypad.
–or–
;;; - ;;; - ;;;;
y or z to
select a number
from the phone list.
–or– (see step 7)
a. Press and release the
7
preprogrammed Speed Dial button
(see step 6) to use the Speed Dial
feature.
b. Press the key (1 to 9) corresponding
to the number you want to call, or
press 0 if you want to call the last
number dialed.
Note: To redial the last number dialed (if
not using Speed Dial), press and
release the PTT button immediately
after the access code is sent. The
radio sends the last number dialed.
–or–
If you entered your access code
using the keypad, press
to access the last number dialed;
then press and release the PTT
button.
z
once
81
English