Motorola CDM1550-LS+ User Manual page 50

–or–
Enter the ID number of the radio you wish
to page. (Full keypad model only.)
–or–
Press * and DTMF key (0 to 9) (if pro-
grammed by your dealer) corresponding
to the radio you wish to page.
Note:
5 Press the PTT button to send the Call
Alert.
• While the Call Alert is being estab-
6 Once the Call Alert
is received and
acknowledged by
the target radio, the
F displays solid
and you see:
50
English
This option does not require you to
press the PTT button to send the
Call Alert.
lished the F blinks and the red LED
indicator flashes momentarily.
$FNQRZOHGJH
Notes:
• If the Call Alert cannot be established,
1R $FNQRZOHGJH
you see:
for 5 seconds. The LED indicator turns
off.
• If all channels are busy while attempt-
ing a Call Alert,
6\VWHP %XV\
you see:
and will hear a delayed busy tone as
long as the PTT button is pressed.
If the PTT button is kept pressed and
the system frees up a channel, the
radio automatically attempts to re-
establish the call.
• ( to end the Call Alert and revert to
talkgroup dispatch, or press the pre-
programmed Call Alert button. You can
then manually re-initiate the call. (See
Step 1.)
7 ( to end the Call Alert.