Protecting Images - Minolta Dimage Ex Instruction Manual

PROTECTING IMAGES

Important images can be write-protected to guard them from accidental deletion. Protected images cannot
be removed from the compact flash card using the Delete function.
Turn the camera on and slide the Mode switch to REV.
• Press the green lock button while switching to REV from PLAY or REC.
Select a single image (p. 75), mark multiple images (p. 76), or
select a group of images (pp. 75, 86).
90
Press the menu button.
• The Review mode menus will appear.
Press the Left or Right button to
select the Edit menu.
Press the Up or Down button to
highlight Protect.
Press the Protect soft key.
• The camera will return to the Review screen
when complete.
• The protect icon will appear at the
bottom-right of the Review screen when the
protected image is selected.
✎ The Unprotect soft key appears when a
protected image is selected. Use this
soft key to unprotect images.
✎ The Exit key returns the camera to the
Review screen.
TRANSFER CAMERA-CAMERA
It is possible to make a wireless transfer of images between two cameras that both use the Digita
operating system and have IrDA interfaces. These instructions assume both the sending and receiving
camera is a Minolta Dimâge EX.
PREPARATION
Place the sending and receiving cameras so they face each
other.
• The cameras should approximately 30 - 60cm (about 1 - 2 feet) apart.
• Be sure no obstructions are between the two cameras and nothing is blocking the
IrDA sensors.
Turn both cameras on and slide the Mode switches to REV.
• Press the green lock button while switching to REV from PLAY or REC.
RECEIVING CAMERA
Press the menu button.
• The Review mode menus will appear.
Press the Left or Right button to
select the Camera-Camera menu.
Press the Up or Down button to
highlight Receive... .
Continued on next page. 91