Set Mca-C5 Sources - Russound DMS-3.1 Installation Manual

1. Turn on the MCA-C5 and wait for the MDK-C5 to momentarily display
Controller 1 Source 1.
2. Plug a USB cable from the IBM PC to the MCA-C5 front USB port.
3. Open RVCLIScipter.
4. If the Command Queue window displays the DMS-3.1v* Test Scripts go the next step.

Set MCA-C5 Sources

If DMS-3.1v* is not displayed
Click "File" the "Open Entire Test Suite"
and Navigate to where the DMS-31v* is located and open it.
DMS-3.1 Test Procedure
37 of 64