Audio Connections With C-Series Controllers - Russound DMS-3.1 Installation Manual

AUDIO CONNECTIONS WITH C-SERIES CONTROLLERS

The DMS-3.1 can be used with a Russound C-Series controller and supported
user interfaces to access all features and provide amplifi cation for speakers in
multiple locations. Use standard RCA audio patch cables to connect the audio
outputs of the DMS-3.1 to the source inputs on the C-Series controller.
Network router
12
DMS-3.1_Manual Rev 0.indd 12 DMS-3.1_Manual Rev 0.indd 12
For proper operation with C-Series controllers, the DMS-3.1 source ID
switches need to be set to correspond to the source inputs used on the
C-Series controller. These settings must match the C-Series controller system
confi guration programmed through SCS-C5 software.
For more information, please refer to your C-Series product manual.
RCA cables
Connections for audio
Russound DMS-3.1 Installation Manual
AM loop antenna
FM antenna
RCA cables
DSM-3.1 Streamer
MCA-C5 Controller
9/30/11 12:12 PM 9/30/11 12:12 PM