Prepare Usb Flash Drive - Russound DMS-3.1 Installation Manual

1. Obtain the firmware files listed in this folder from Russound SQA.
Place the files on a 2 Gig USB Flash Drive.
Ensure the Flash Drive is no larger than 2 Gig.
Important: The "dms31_v00.01.00_r72678.img" is for example only.
The actual version of the dms31_v*.img is obtained from SQA.
2. Copy at91bootstrap.bin and u-boot.bin to a folder named "Streamer Bootloader"
on your PC desktop.
3. Close the "Streamer Bootloader" folder.
Close the Streamer files" folder and flash drive folder.

Prepare USB Flash Drive

DMS-3.1 Test Procedure
16 of 64