37) Remove the MAIN DISPLAY. Discard it.
39) Carefully separate the C-COVER so that the flex
and the connector stays unharmed.
41) Push out the HINGE MOTOR with a screwdriver.
18
38) Push the SS-212 tool into the hole to the
maximum depth to release the spring holding the C-
COVER. Keep the spring pressed and gently push the
C-COVER to the position shown in main picture.
Before twisting them all apart, pull out the SS-212
to avoid it from bending.
40) Remove the C-COVER EARS ASSY as shown. Do
not use it again. Discard it.
42) Start releasing the UI FLEX ASSY with the SS-93.
Confidential Copyright © 2009 NOKIA All rights reserved
Nokia 7020 RM-497
Service Manual Level 1&2
Version 2.0
ISSUE 1