7) Finally loosen carefully the adhesive on the
bottom side of the KEYMAT ASSEMBLY.
9) Unscrew the four TORX + size 4 screws
order
shown. Do not use them again.
11) Open the connector with SS-93 as shown. The
vibra rotor can be used as a lever. Be careful not to
damage the components nearby!
13
8) Remove the KEYMAT ASSEMBLY. Do not use it
again. Discard it.
in the
10) Lift up the PWB in the direction shown.
12) Remove the PWB.
Confidential Copyright © 2009 NOKIA All rights reserved
Nokia 7020 RM-497
Service Manual Level 1&2
Version 2.0
ISSUE 1