While Servicing; After Servicing - Samsung DMT800 SERIES Service Manual

1. Safety Instructions
Check if the power cable is damaged, flattened, cut or otherwise degraded.
If faulty, replace it immediately.
Failing to do so may result in electric shock or fire.
Completely remove any dust or foreign material from the housing, wiring and connection
parts.
This will prevent a risk of fire due to arcing and short circuits in advance.
When connecting wires, make sure to connect them using the relevant connectors and
check that they are completely connected.
If tape is used instead of the connectors, it may cause fire due to arcing.
Make sure to disconnect the PBA power terminals before starting the service.
Failing to do so may result in a high voltage electric shock.
When replacing the heater, make sure to fasten the nut after ensuring that it is inserted
into the bracket-heater.
If not fasten the nut of the heater, it cause water and electric leakage.
Check for any water leakage.
Perform a test run for the dishwasher using the standard(normal) cycle and check
whether there is any water leakage through the floor section or the pipes.
Do not allow consumers to repair or service any part of the dishwasher themselves.
This may result in personal injury and shorten the product lifetime.
If it seems that grounding is needed due to water or moisture, make sure to run
grounding wires.
Failing to do so may result in electric shock due to electric leakage.
1-2

While Servicing

After Servicing