Samsung DMT800 SERIES Service Manual page 16

3. Disassembly and Reassembly
Part
Control Panel
(DMT400)
Reassembly is in the reverse order of the removal.
3-6
Photo Description
Preparation:
* Disassemble the frame front , Assy control panel and
Door lock switch.
- Refer the "Frame front" disassembly section to
separate the Frame front.
1. Remove two(2) connectors in the display – PCB.
2. Pull the control panel up slightly from Assy frame
front , and pull it out.
3. Unscrew two(2) screws to remove display-PCB and
guide-LED.
4. Disconnect the 2 wire connectors from control
panel(touch-PCB).