Playing Cds; Checking The Remaining Time - Sony MHC-V800 Operating Instructions Manual

Playing CDs

After loading up to three CDs, you can play
all tracks or discs in the original order
consecutively.
POWER m ON
EX-CHANGE
DISC
SKIP
2
1/ALL DISCS JOG
EN
10
CDÆ
=/+
1
Press § OPEN/CLOSE and place CDs
(label side facing up) on the disc tray.
To insert a third disc
Press DISC SKIP (or D.SKIP on the
remote). The disc tray rotates so you can
insert another CD.
2
Press DISC 1 ~ 3 to select a disc.
The disc tray closes automatically and
playback starts from the selected CD.
If no disc was loaded on the selected
tray, the plater automatically switches to
the next disc .
Chapter 2: the Video CD/CD-G/CD Player
To
Stop play
Pause
Resume play
Go forward to
another track
Go back to a
previous track
p
Æ‚
1
Locate a specific
part of a track
Select a particular
CD
Listen to only the
currently selected
disc
Listen to all the
discs
Remove the CD
Switch the other
D.SKIP
discs during
playback
P
* 1 When the player is set to "ALL DISCS"
you can use JOG to search through all
0/)
the tracks on all the discs loaded in the
player (seamless feature).
* 2 If no disc is loaded at that number, the
tray will emerge.
One Touch Play feature
Press ·
the remote) when the power is off. When a
CD is in the player, you will be able to start
listening to the CD without pressing any
other buttons.
Automatic Source Selection
If you press ·
while you are listening to other sound
source, the CD player is selected and the
last played CD starts playing automatically.
If the CD player has been in the program
play mode, only ·
function.
If there is no CD in the player
"CD NO DISC" appears in the display.
Press ·
the indication is on, then the disc tray will
open automatically.
Press (on remote)
p
( P )
·
· ( C D · o r P )
Turn JOG dial
clockwise* 1 (+ ).
Turn JOG dial
counterclockwise* 1
( = ) .
( h o l d 0 o r ) ) .
DISC 1 ~ 3* 2 or press
DISC SKIP (D.SKIP)
repeatedly.
1/ALL DISCS
repeatedly until "1
DISC" appears in the
display.
1/ALL DISCS
repeatedly until "ALL
DISCS" appears in the
display.
§ OPEN/CLOSE
EX-CHANGE
on the CD player (or CD · on
or the DISC 1 ~ 3 buttons
can be used for this
(or CD · on the remote) while
Checking the
Remaining Time
You can check information about the
current CD using the front panel display.
POWER m ON
DISPLAY/DEMO Front panel display
DISPLAY
To check the remaining time
Press DISPLAY/DEMO (or DISPLAY on
the remote) during playback.
Each time you press the button, the display
changes as follows:
(ALL DISCS mode)
m Playing time on current track
µ
Remaining time on current track
µ
"Play" display
µ
Clock display (for eight seconds)
µ
Effect (or P FILE) name
(1 DISC mode)
m Playing time on current track
µ
Remaining time on current track
µ
Remaining time on current CD
µ
Clock display (for eight seconds)
µ
Effect (or P FILE) name