OPERATION
Electric-start Models (ATD, AWD type)
Turn the engine switch to the
START position and release the
switch after the engine has
started. The switch
automatically returns to the ON
position.
Do not operate the starter for
more than one minute. If the
engine fails to start, release the
button and allow the starter to
cool for 15 minutes before
operating it again.
Manual Starting only
a. Turn the engine switch to the
ON position.
b. Pull the starter grip lightly
until you feel resistance, then
pull briskly in the direction of
the arrow as shown.
c. Return the starter grip gently
to the engine.
Do not allow the starter grip to snap back against the engine.
Return it gently to prevent damage to the starter.
Do not pull the starter grip while the engine is running. The starter
could be damaged.
28
OFF
DC ELECTRIC ENGINE SWITCH
STARTER GRIP
Direction to pull
ON
START