Features; Led Work Light; Snow Clearing Bar - Honda HSS724A Owner's Manual

CONTROLS & FEATURES

FEATURES

LED Work Light

The LED work light comes ON
while the engine is running, and it
goes OFF when the engine stops.
The light does not come ON when
the engine switch is turned ON
unless the engine is started.

Snow Clearing Bar

If the snow discharge chute or
snow blowing mechanism
becomes restricted, stop the
engine and make sure all rotating
parts have come to a complete
stop. Remove the spark plug cap
from the spark plug.
Use the snow clearing bar to remove the obstruction.
An obstructed auger or blower could suddenly
move when the obstruction is cleared.
Sudden auger or blower movement will cause
severe injury if your hands are being used to
clear the area.
Never clear the discharge chute or auger area
with your hands, and always stop the engine,
remove the spark plug cap, and clear
obstructions with the clearing bar.
After clearing the obstruction, wipe the bar clean and store it in the
holders. Replace the spark plug cap.
22
LED WORK LIGHT
SNOW CLEARING BAR