Motorola APX 8000 3 User Manual page 149

The following methods are options on how to turn on
Bluetooth visibility. The result of all the methods is the
same. You can use the options interchangeably
depending on your preference and the programmed
functions.
•
Turn on Bluetooth visibility via radio menu BT:
a)
or to BT. Press the Menu Select button
directly below BT to access the Bluetooth
feature screen.
b)
or to Visibility and press the Menu
Select button directly below On.
The status changes to Visible to all.
Visibility mode is enabled.
When the timer expires, the status changes to
Visibility failed. Repeat the procedure to
turn on Bluetooth visibility.
• Turn on Bluetooth visibility via the preprogrammed
button.
a) Press the preprogrammed button to enable the
Bluetooth visibility feature.
You hear a short, medium-pitched tone. The
display shows momentary Visible to all.
Visibility mode is enabled.
When the timer expires, the display shows
momentary Visibility failed. Repeat the
procedure to turn on Bluetooth visibility.
Receiving Pairing Request from other Devices
When your radio receives a pairing request from
other device, the display shows <Device Friendly
Name>pair request.
Press the Menu Select button below Ok to accept
or Cncl to refuse pairing request.
Turning Off Bluetooth Visibility
Ensure that Bluetooth Visibility is turned on.
The following methods are options on how to turn off
Bluetooth visibility. The result of all the methods is the
same. You can use the options interchangeably
depending on your preference and the programmed
functions.
•
Turn off Bluetooth visibility via radio menu BT:
BETA
Note
Press the preprogrammed button to
toggle the Bluetooth visibility on or off.
145
English