Motorola APX 8000 3 User Manual page 148

the device before the pairing completes. Your radio
prompts for the Authentication PIN when needed.
Refer to your device's manual for details about the
Bluetooth Authentication PIN of your device if
needed.
Searching and Pairing the Bluetooth Device
Ensure the Bluetooth on your device is turned on and
is set to Discoverable in order to enable your radio to
detect your device in Bluetooth.
Bluetooth Search in Bluetooth Standard Pairing
method is used to scan for other Bluetooth devices
nearby. It is set to off by default.
1 Perform one of the following actions:
• Press the preprogrammed Bluetooth Search
button .
•
or to BT. Press the Menu Select button
directly below BT to access the Bluetooth
feature screen.
and press the Menu Select button directly
below On.
If successful, the display shows Searching for
BT devices followed by the names of Bluetooth
144
devices found, if any. When the search timer
English
or to Search Devices
BETA
expires, Available Dev screen shows a list of
Bluetooth devices found. To stop the search
before the search timer expires, press the
preprogrammed Bluetooth Search button or the
Menu Select button below Stop.
If the feature fails to initiate, the radio sounds a
short, low-pitched tone. The screen shows BT
Search failed. Press the Menu Select button
below Back to return to Bluetooth feature screen,
or press or the Menu Select button below
Exit to return to Home screen.
2 or to the device name and press the Menu
Select button directly below Sel to connect to the
device.
The radio starts pairing to the device.
To continue with Bluetooth pairing, see
Low Frequency-Motorola Proximity Pairing (LF-MPP)
Feature on page 141.
Turning On Bluetooth Visibility
Turning Bluetooth visibility to on enables other
Bluetooth devices to search for your radio. The
visibility of the Bluetooth is set to off by default.
Pairing with