Motorola APX 8000 3 User Manual page 117

so the message is delivered to the user, not to the
radio which may have any user using it at the time.
Secondly, this feature supports query authentication
requirements so the query service knows which user
originated a query.
You can still send text messages without logging in
as a user. The user login feature only enables the
recipient of your message to identify you as the
sender by assigning a username to your message.
Note
A predefined username that is set more than
the maximum allowed characters is an invalid
name.
Logging in via the Two-Factor Authentication
1 Perform one of the following actions:
• Press the preprogrammed User Login button.
•
or to User, and press the Menu Select
button directly below User.
The display shows the User Login screen.
2 Perform one of the following actions:
•
or
Select button directly below Edit. A blinking
cursor appears. Use the keypad to type or edit
a username. Press the Menu Select button
directly below Ok to submit.
• or
usernames. Press the Menu Select button
directly below Sel to select the predefined
username.
• Press and hold
list of predefined usernames at a fast scroll
rate. Press the Menu Select button directly
below Sel to select the predefined username.
If the selected predefined username has more
than the maximum allowed characters, or an
invalid character in it, the display shows
momentary Invalid ID.
3 For radio enabled with Unit ID, perform one of the
following actions:
•
or
Menu Select button directly below Edit. A
blinking cursor appears. Use the keypad to
type or edit a Unit ID. Press the Menu Select
button directly below Ok to submit.
BETA
to [ID Entry] and press the Menu
to scroll through the list of predefined
or to scroll through the
to [UnitID Entry] and press the
113
English