Motorola Proximity Pairing (Lf Mpp) Feature - Motorola APX 8000 3 User Manual

Re-Pair Timer Description
Options
Immediate 0 – 15 minutes programmable
(For MCW buffer time to re-establish the
Accessories Bluetooth Connection when the
only) Bluetooth signal is out of range.
If either device powers off, the
pairing keys are immediately
cleared from both devices and the
devices must re-pair.
Infinite (For all This Timer only applies to the
Bluetooth accessory. The programmable
devices) timer choices are: 0 – 15 minutes, 2
hours, 4 hours or 8 hours.
Do note there are exceptions for
Operation Critical Wireless (OCW)
headset and PTT which are
preprogrammed to 8 hours.
This timer is a "stay alive" timer
where the accessory remains on
without the device reconnecting
before powering off. The radio
remains on until the user powers
Re-Pair Timer
Options
The radio could not control the Drop Timer of
Personal Area Networking (PAN), Dial-Up Networking
(DUN), Commercial Off- The-Shelf (COTS) and data
services. It depends on the specifications of these
external devices.
Check with your dealer or system administrator for
more information about these timers.
To establish the Bluetooth Connection, see
with Low Frequency-Motorola Proximity Pairing (LF-
MPP) Feature
Feature on page 143 .
Pairing with Low Frequency-Motorola Proximity Pairing
(LF-MPP) Feature
Ensure that Bluetooth feature of your radio is on and
the Bluetooth tones are enabled.
BETA
Description
off the radio. The radio and
accessory remains paired
indefinitely. Once the device re-
connect, the timer is reset.
on page 141 or Standard Pairing
Pairing
141
English