3Com 4500 Quick Reference Manual page 16

Command
mdi
mirrored-to
mirroring-port
monitor-port
multicast-suppression
packet-filter
poe enable*
poe max-power*
poe mode*
poe priority*
port access vlan
port hybrid pvid vlan
port hybrid vlan
port isolate
port link-aggregation
group
port link-type
port trunk permit vlan
port trunk pvid vlan
priority
priority trust
rmon history
rmon statistics
shutdown
speed
stp
stp cost
stp disable
stp edged-port
stp loop-protection
stp mcheck
stp point-to-point
stp port priority
stp root-protection
stp transmit-limit
unicast-suppression
voice vlan enable
wred
Table 16 Route Policy View
[4500]route-policy policy 1 permit node 1
Command
apply cost
apply tag
Description
Configure the network cable type of the Ethernet ports
Enable ACL traffic identification and perform traffic mirror
Configure a monitored port
Configure a monitor port
Configure the multicast traffic size enabled on port
Activate ACL
Enable PoE
Maximum Power
Port Mode
Port Priority
Join the access port to a specified VLAN
Configure the default VLAN ID of the hybrid port
Join the hybrid port to specified existing VLAN
Add a port to an isolation group
Add an Ethernet port into a manual or static aggregation
group
Configure the link type of Ethernet port
Join trunk port to specified VLAN
Configure the default VLAN ID of trunk port
Configure the priority of Ethernet port
Configure system trusting the packet 802.1p priority and not
replacing the 802.1p priorities carried by the packets with the
port priority
Add an entry to the history control table
Add an entry to the statistic table
Disable the port
Configure the port speed
Enable Spanning Tree Protocol
Configure the path cost on a spanning tree for the current
Ethernet port
Disable spanning tree protocol on the port
Configure the current port as an edge port
Enable loop protection function
Force the port to work in RSTP mode
Configure the link to the current port as point-to-point link or
not point-to-point link
Configure the priority of the current Ethernet port
Enable Root protection
Set the maximum number of STP packets the current port can
send within one Hello time
Configure the limit to unknown unicast flooding
Enable the Voice VLAN features on the port
Configure WRED parameters
Description
Configure the route cost value of route information
Set a tag field of the matched route
Specify name, action and node to see the options below
16
Web Command
Port -> Administration
Port -> Mirroring
Port -> Mirroring
Device -> PoE
Port -> Administration
Port -> Administration
Port -> Administration
Port -> Administration
Port -> Administration
Port -> Administration
Port -> Administration
Port -> Spanning Tree Per Port
Port -> Spanning Tree Per Port
Port -> Spanning Tree Per Port
Port -> Spanning Tree Per Port
Port -> Spanning Tree Per Port
Port -> Spanning Tree Per Port
Port -> Spanning Tree Per Port
Port -> Spanning Tree Per Port
Port -> Spanning Tree Per Port
Web Command