Table of Contents
Advertisement
Servicing Hints
Replacement of CD Drive
See also exploded view of changer mechanism.
1. Demount flex plate (pos 140).
2. Demount printed circuit board: remove 6 screws and
desolder lips of tray motor and carrousel motor.
3. Disconnect flexfoil and JST connector of CD drive from
Printed circuit board. Shortcircuit the flexfoil with a
paperclip to protect the laser against ESD.
CD drive flex foil
Mounting of Carrousel
1. Turn gearwheel (pos 42) of disc change mechanism by finger until CD drive is in play position.
2. Mount carrousel (pos 115) so that disc is positioned right on turntable. Carrousel position number doesn´t matter.
10-3
4. Remove 2 screws (pos 107,108) and demount CD drive
lockings (pos 105,106).
5. Turn gearwheel (pos 42) of disc change mechanism by
finger to move CD drive support in upper position as
shown in picture below A.
6. Demount CD drive support (pos 95) B.
7. Replace CD drive (pos 100). The wire tree of JST
connector has to be desoldered and resoldered on the
new CD drive again.
B
A
CS 53 002
Hide quick links:
Advertisement
Table of Contents
