Philips FW-V28 Service Manual page 15

RECORDING
MINI HIFI SYSTEM
STANDBY-ON
C D 1 • 2 • 3
VCD
PAL/NTSC
TUNING
SEARCH
DIGITAL
DSC SOUND
CONTROL PROGRAM RECORD DUBBING A.REPLAY
MICROPHONE - LEVEL
▲
OPEN
PLAY/ REC
TAPE 1
FULL AUTO STOP
RECORDING
Note:
– During recording, it is not possible to
listen to another source.
Dubbing tapes
(from tape deck 1 to
tape deck 2)
1 Press TAPE ( TAPE 1•2 ) to select tape
deck 2.
2 Load the prerecorded tape into tape
deck 1 and a blank tape into tape deck 2
with full spool to the left.
3 Press DUBBING
™ "DUB" with "2 2 2 2 2 " scrolling right will be
displayed.
• Dubbing will start immediately.
™ The REC flag starts flashing.
4 Press Ç to stop dubbing.
Notes:
– At the end of side A, flip the tapes to
side B and repeat the procedure.
– Dubbing of tapes is only possible from
tape deck 1 to tape deck 2.
– To ensure good dubbing, use tapes of
the same length.
– You can listen to other source while
dubbing.
22
BAND TAPE 1 • 2 VIDEO
TUNER TAPE AUX
▲
PRESET
STOP• CLEAR PLAY• PAUSE PREV NEXT
DIM
PBC
RETURN CLOCK•TIMER
VOLUME
TAPE 2
VCD/CD Synchro Start
Recording
1 Load a blank tape into tape deck 2 and a
disc into a disc tray.
2 Press VCD to select VCD/CD mode.
• You can program the tracks in the order
you want them to be recorded (see
Programming Tracks). If not, select the
disc by pressing VCD (CD 1•2•3) and
the tracks are recorded according to the
order on the selected disc.
3 Press RECORD to start recording.
™ The REC flag starts flashing.
• Disc will start playback automatically.
4 Press Ç to stop recording.
2-9
Notes:
– If you do not intend to record via the
microphone, unplug the microphone to
avoid accidental mixing with other
recording source.
– For recording, use only tape of IEC type I
(normal tape) or IEC type II (Cr0 2 ).
– The tape is secured at both ends with
leader tape. At the beginning and end
of tape, nothing will be recorded for six
to seven seconds.
– The recording level is set automatically,
regardless of the position of VOLUME,
DBB, Incredible Surround, DSC or VEC.
▲
– To prevent accidental recording, break
OPEN
PLAYBACK
out the tab on the left shoulder of the
tape side that you want to protect.
– If " CHECK TAPE " is displayed, the
protection tab has been broken. Put a
piece of clear adhesive tape over the
opening. Do not cover the Cr0 2 tape
detection hole when covering the tab
opening.
CLOCK
MINI HIFI SYSTEM
STANDBY-ON
CD1 • 2 • 3
VCD
PAL/NTSC
DIGITAL
DSC
SOUND
PROGRAM
CONTROL
MICROPHONE - LEVEL
View Clock
You can view the clock (if it is set) if the
system is in Standby mode or when any
sound source is selected (VCD, TUNER,
etc.). The clock will be displayed for about
seven seconds.
• Press CLOCK•TIMER briefly.
™ "10:38 or 22:38" (the
PM
current time in either 12- or 24-hour
mode) will be displayed depending
on whether you have selected 12- or
24-hour mode.
™ "--:--" will be displayed if the
clock is not set.
Recording the mixed sound /
One Touch Recording
• During microphone mixing, you can
record the mixed sound on a tape in
tape deck 2 except dubbing mode.
• For One Touch Recording, as soon as you
press RECORD, the current source (VCD,
TUNER or AUX) will be recorded on tape
deck 2.
1 Load a blank tape in tape deck 2.
2 Press RECORD to start recording.
™ The REC flag starts flashing.
3 Press Ç to stop recording.
Note:
– When you press RECORD while in TAPE
mode, " SELECT SOURCE " will be
displayed. One Touch Recording is not
possible in TAPE mode.
Recording from other sources
(only on tape deck 2)
1 Press TAPE ( TAPE 1•2 ) to select tape
deck 2.
2 Load a blank tape into tape deck 2 with
the open side downward.
3 Press VCD, TUNER or AUX.
• Start playback of the selected source.
4 Press RECORD to start recording.
™ The REC flag starts flashing.
5 Press Ç to stop recording.
BAND TAPE 1 • 2 VIDEO
TUNER TAPE AUX
▲
TUNING PRESET
SEARCH STOP• CLEAR PLAY• PAUSE PREV NEXT
RECORD DUBBING A.REPLAY DIM
PBC
RETURN CLOCK•TIMER
VOLUME
Clock Setting
The clock can be set in either 12- or 24-
hour mode, e.g. "12:00
AM
Before setting the clock, you must be in the
View Clock mode.
1 Press CLOCK•TIMER to select clock
mode.
2 Press PROGRAM to select 12- and 24-
hour mode.
™ If 12-hour mode is selected, "12:00"
starts flashing and the
™ If 24-hour mode is selected, "00:00"
starts flashing.
3 Set the hour with à or á on the
system.
4 Set the minute with í or ë on the
system.
21
" or "00:00".
lights up.
AM
PCS 103 735