Maintenance; Specifi Cations - Kenwood SW-21HT Instruction Manual

Maintenance

Maintenance of the unit
When the front panel or case becomes dirty,
wipe with a soft, dry cloth. Do not use thinner,
benzine, alcohol, etc. for these agents may cause
discoloration.
In regard to contact cleaner
Do not use contact cleaners because it could
cause a malfunction. Be specially careful not to use
contact cleaners containing oil, for they may deform
the plastic component.

Specifi cations

Type
............Subwoofer system with built-in amplifi er
[Amplifi er]
Rated Output Power ............ 100 W RMS (100 Hz, 3 Ω)
Input terminals (Sensitivity/impedance)
................................................ 500 mV / 22 kΩ
[Speaker]
Enclosure ............... Bass-Refl ex, Floor Standing Type
Speakers .................................... 160 mm cone type
Impedance ................................................... 3 Ω
Frequency response ...........................35 Hz ~ 500 Hz
[General]
Power Consumption .......................................... 25 W
Power consumption in standby mode .........0.5 W or less
Dimensions .................................... Width 173 mm
Net Weight ................................................ 5.1 kg
• Design and specifi cations are subject to change without
notice.
• The system may be unable to manifest the full
performance in an extremely cold place (under the
water freezing temperature).
          A ' P I N K U J A U K F G  K P F D 
For your records
Record the serial number, found on the back of the
unit, in the spaces designated on the warranty card,
and in the space provided below.
Refer to these model and serial numbers whenever
you call upon your Kenwood dealer for information
or service on this product.
SW-21HT Serial number
Declaration of Conformity with regard to
the EMC Directive 2004/108/EC
Manufacturer:
Kenwood Corporation
2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan
EU Representative's:
Kenwood Electronics Europe BV
Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands
Information on Disposal of Old Electrical
and Electronic Equipment and Batteries
(applicable for EU countries that have
adopted separate waste collection systems)
Height 321 mm
Depth 334 mm
Products and batteries with the symbol
(crossed-out wheeled bin) cannot be disposed
as household waste.
Old electrical and electronic equipment and
batteries should be recycled at a facility
capable of handling these items and their
waste by products.
Contact your local authority for details in
locating a recycle facility nearest to you.
Proper recycling and waste disposal will help
conserve resources whilst preventing
detrimental effects on our health and the
environment.
Notice: The sign "Pb" below the symbol for
batteries indicates that this battery
contains lead.
English
7