POWER SUBWOOFER
SW-3HT
SERVICE MANUAL
Cloth frame assy
(B06-1144-08)
Badge
(B43-0847-04)
Type .......................................... Subwoofer system with built-in
[Amplifier]
100 watts RMS, at 4 W, from 20 Hz to 200 Hz with no more
than 0.09 % total harmonic distortion.
Phase Switching ..................... NORMAL, REVERSE
Input Sensitivity & Input Impedance
RCA-type pin-plug jack ....... 45 mV (12 kW)
Push-type terminals ............ 0.7 V (5 kW)
Supply Voltage ....................... U.S.A. and Canada
Other countries AC 110 V - 120 V/ AC 220 V - 240 V
Rated Power Consumption .. 110 W
Note:
KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.
Power knob (REAR)
(K29-0579-08)
SPECIFICATIONS
amplifier
AC 120 V
© 1997-11/B51-5394-00 (K/K) 1396
LED
Speaker terminal
(B30-1822-08)
(E21-0279-08)
INPUT
FROM AMPLIFIER
+
R
–
–
L
+
POWER
ON
OFF
+
R
–
–
L
+
TO SPEAKERS
Cord bushing
AC cord *
(J42-0234-08)
(E30-)
[Speaker]
Enclosure ................................. Bass-Reflex,
Speaker Units ......................... 250 mm Cone type
Nominal Impedance .............. 4 W
Dimensions .............................. Width : 300 mm (11-13/16")
Net Weight .............................. 16 kg (35.3 lb)
Supplied Accessories ............ Pin-plug cord × 1
.................................................... Pads
NOTE: DO NOT REMOVE THE GRILLE.
Slide switch voltage *
(S31-)
SERIAL NO.
PHASE
LEVEL CONTROL
LINE
NORMAL
REVERSE
Slide switch phase
Level control knob
(S62-0207-08)
(K29-0576-08)
* Refer to parts list on page 7.
Floor
Standing
Type
Height : 420 mm (16-9/16")
Depth : 444 mm (17-1/2")
(× 4)