Maintenance; Specifications - Kenwood SW-45HT Instruction Manual

Maintenance

Maintenance of the unit
When the front panel or case becomes dirty,
wipe with a soft, dry cloth. Do not use thinner,
benzine, alcohol, etc. for these agents may cause
discoloration.
In regard to contact cleaner
Do not use contact cleaners as this could cause a
malfunction. Be especially careful not to use contact
cleaners containing oil, for they may deform the
plastic component.

Specifications

Type
........................... Powered Subwoofer system
[Amplifier]
Rated Output Power ...100 W (4 Ω RMS, 100 Hz 10% THD)
Input terminals (Sensitivity/impedance)
................................................ 300 mV / 22 kΩ
[Speaker]
Enclosure ............... Bass-Reflex, Floor Standing Type
Speakers .................................... 160 mm cone type
Impedance ................................................... 4 Ω
Frequency response ...........................33 Hz ~ 500 Hz
[General]
Power source ................................. AC 230 V
Power Consumption .......................................... 25 W
Power consumption in standby mode .........0.5 W or less
Dimensions ....................................Width 230 mm
Net Weight ................................................ 6.5 kg
• Design and specifications are subject to change without
notice.
• The system may be unable to manifest the full
performance in an extremely cold place (under the
water freezing temperature).
For your records
Record the serial number, found on the back of the
unit, in the spaces designated on the warranty card,
and in the space provided below.
Refer to these model and serial numbers whenever
you call upon your Kenwood dealer for information
or service on this product.
SW-45HT Serial number
Declaration of Conformity with regard to
the EMC Directive 2004/108/EC
Manufacturer:
JVC KENWOOD Corporation
3-12 Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa,
221-0022, Japan
EU Representative's:
JVCKENWOOD Nederland B.V.
Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands
Information on Disposal of Old Electrical
and Electronic Equipment and Batteries
(applicable for countries that have adopted
separate waste collection systems)
, 50 Hz
Height 419 mm
Depth 366 mm
Products and batteries with the symbol
(crossed-out wheeled bin) cannot be disposed
as household waste.
Old electrical and electronic equipment
and batteries should be recycled at a facility
capable of handling these items and their
waste by products.
Contact your local authority for details in
locating a recycle facility nearest to you.
Proper recycling and waste disposal will
help conserve resources whilst preventing
detrimental effects on our health and the
environment.
Notice: The sign "Pb" below the symbol for
batteries indicates that this battery
contains lead.
7
English