Removing The Appliance; Transportation; Protection Against Frost (Emptying The Appliance) - Siemens SN... Operating Instructions Manual

Removing the appliance

Also observe
the sequence of worksteps here.
1. Disconnect the appliance from
the power supply.
2. Turn off the water supply.
3. Disconnect the waste water
and fresh water connections.
4. Loosen fastening screws for the
furniture parts.
5. If fitted, remove the base panel.
6. Pull out the appliance, carefully
pulling the hose behind.

Transportation

Empty the dishwasher and secure loose
parts.
Drain the appliance according to the
following steps:
1. Turn on the tap.
2. Close the door.
3. Switch on ON/OFF switch (.
4. Select programme with the highest Select programme with the highest Select programme with the highest
temperature.
The expected programme duration is The expected programme duration is The expected programme duration is
indicated on the numerical display indicated on the numerical display indicated on the numerical display
)*.
5. Press START button h.
Press START button Press START button
Programme sequence starts. Programme sequence starts. Programme sequence starts.
6. After approx. 4 minutes press the After approx. 4 minutes press the After approx. 4 minutes press the
START button h until :
indicated on the digital display.
After approx. 1 min :
on the digital display .
7. Switch off ON/OFF switch (.
8. Turn off the tap, disconnect supply
hose and drain water.
Transport appliance upright only.
(This prevents residual water from
running into the machine control and
damaging the programme sequence.)
h h
is
is indicated
Installation and connection
Protection against frost
If the appliance is in a room where there
is a risk of frost (e.g. holiday home),
empty the appliance completely (see
Transportation).
6XEMHFW WR FKDQJHV
en
Pr o t e c t i o n a g a i n s t fr o s t ( E m p t y i n g t h e a p p l i a n c e )
39