Input Buttons - Sony STR-DN1070 Operating Instructions Manual

Remote control
  (power)
Turns the receiver on or sets it to the standby
mode.
Saving power in standby mode
Check that you have made the following
settings:

Set [Control for HDMI], [Remote Start],
[Bluetooth Standby], and [Quick Start/
Network Standby]* to [Off].

Turn off the power for Zone 2, Zone 3 and
HDMI zone.
HDMI OUT
Switches the output for two monitors
connected to the HDMI OUT A (TV) and HDMI
OUT B/HDMI ZONE jacks. Output is toggled
between "HDMI A", "HDMI B", "HDMI A+B" and
"HDMI OFF" each time the button is pressed.
Select "HDMI OFF" to turn off the output for
HDMI OUT A (TV) and HDMI OUT B/HDMI ZONE
jacks.

 Input buttons

BD/DVD, SAT/CATV, GAME, SA-CD/CD,
USB, TV, FM
Selects the input channel connected to the
device you want to use. When you press any of
the input buttons, the receiver turns on.
WATCH, LISTEN
Selects [Watch] or [Listen] on the home menu
directly. When pressing these buttons on the
Watch or Listen screen, you can move the focus
to select the input you want.
 2CH/MULTI, MOVIE, MUSIC, FRONT
SURROUND
Selects a sound field.
CUSTOM PRESET (1, 2)
Saves and recalls various settings for the
receiver. Press to select the custom preset
setting(s). Press and hold to save the current
settings to a preset.
RX/TX
Switches the [Bluetooth Mode] to [Receiver] or
[Transmitter]. (Disabled while the BLUETOOTH
function or Screen mirroring function is
activated.)
In [Receiver] mode, the receiver receives and
outputs audio from the remote device.
In [Transmitter] mode, the receiver sends audio
to the remote device.
DSD Native
Activates the DSD Native function.
 DISPLAY
Displays information on the TV screen.
AMP MENU
Displays the menu on the display panel to
operate the receiver.
BACK
Returns to the previous menu or exits a menu
or on-screen guide that is displayed on the TV
screen.
OPTIONS
Displays and selects items from the options
menus.
(enter), / / /
Press , , , to select the menu items.
Then, press to enter the selection.
GB
13