Indicators On The Display Panel - Sony STR-DN1070 Operating Instructions Manual

* When [Bluetooth Standby] is activated, the
indicator lights up in amber only if a device has
been paired with the receiver. If no devices are
paired with the receiver, the indicator turns off.
** For USA, Canadian and Oceanian models only.

Indicators on the display panel

The indicator lights up to indicate the current status.
 Input indicator
Indicate the current input.
HDMI
Digital signals are input through the selected
HDMI jack.
ARC
TV input is selected and Audio Return Channel
(ARC) signals are detected.
COAX
Digital signals are input through the COAXIAL
jack.
OPT
Digital signals are input through the OPTICAL
jack.
 S.OPTIMIZER
The Sound Optimizer function is activated.
 D.C.A.C.
The measurement results of the Auto
Calibration function are applied.
 Dolby Digital Surround indicator*
The receiver is decoding the corresponding
Dolby Digital format signals.
Dolby Digital
TrueHD Dolby TrueHD
 DTS(-HD) indicator*
The receiver is decoding the corresponding DTS
format signals.
DTS DTS
DTS-HD DTS-HD
 Speaker system indicator (page 36)
 ST
The receiver tunes to a stereo broadcast.
 HDMI OUT A + B
 SLEEP
Sleep timer is activated.
 EQ
Equalizer is activated.
 D.L.L.
The Digital Legato Linear (D.L.L.) function is
activated.
 D.R.C.
Dynamic range compression is activated.
 NEO:6
DTS Neo:6 Cinema/Music decoding is
activated.
 Dolby Pro Logic indicator
The receiver is processing Dolby Pro Logic
format signals. This matrix surround decoding
technology can enhance input signals.
PL Dolby Pro Logic
PLII Dolby Pro Logic II
PLIIx Dolby Pro Logic IIx
Note
These indicators may not light up depending on
the speaker pattern setting.
 ZONE, ZONE2, ZONE3
"ZONE2", "ZONE3" or both light up while the
power to the corresponding zone is on.
"ZONE" and "HDMI OUT" light up when the
power for HDMI zone is on.
 A.P.M.
The A.P.M. (Automatic Phase Matching)
function is activated. You can only set the
A.P.M. function in the D.C.A.C. (Digital Cinema
Auto Calibration) function.
 UPDATE
New software is available.
 Wireless LAN signal strength indicator
Show the strength of the wireless LAN signal.
No signal
Weak signal
Moderate signal
Strong signal
GB
11