Pioneer VSX-55TXi Service Manual page 181

5
QQ
DNR (DIGITAL NR) button
3 7 63 1515 0
Switches the DIGITAL NR on or off.
VIDEO SEL button
Use to toggle between the different video input
possibilities.
HI-BIT button
Use this button to switch the AUDIO SCALER on
or off.
5 SYSTEM SETUP button
Use for all system setups, including the speaker
and sound systems. For more information see
"Setting Up for Surround Sound".
For a DVD player use this button to
bring up the DVD menu and for a tuner use this
button in the same way as the TUNER EDIT
button.
6 5/∞/2/3/ENTER buttons
These buttons can be used for a variety of
operations in the SYSTEM SETUP menu.
These buttons are used to control the menus for
other components when in those modes (DVD,
digital TV tuner, satellite tuner, cable tuner, etc.).
In TUNER mode, they can select a station and/or
a frequency.
7 AUDIO button
Use to switch the audio tracks of a DVD when in
DVD mode.
8 Command button for other components
Use these buttons to control other components
TE
L 13942296513
you selected with the MULTI CONTROL buttons.
You must input the preset code in order use this
function.
9 TV CONTROL buttons
The following buttons are used to control the TV
only and can be used once they are preset to
control your TV.
TV INPUT: Press to select the input source for
the TV.
TV CH +/– : Use these buttons to change the
channel of the TV.
TV VOL +/– : Press to control the volume of the
TV.
10 Listening mode buttons
SURROUND buttons (MOVIE, MUSIC,
ENTER):
MOVIE: Press to put the receiver into MOVIE
listening mode.
MUSIC: Press to put the receiver into MUSIC
listening mode.
: Use to select the MOVIE or MUSIC
listening mode.
ENTER: Use this button to enter information
concerning the listening modes.
www
STEREO/DIRECT: Switches the
receiver into STEREO mode if it was in a different
sound mode or toggles between DIRECT and
STEREO mode.
.
5
http://www.xiaoyu163.com
6
x ao u163
y
i
6
http://www.xiaoyu163.com
7
11 SB CH MODE button
2 9
8
Use this button to turn the surround back
channels ON/OFF/AUTO or switch the virtual
surround back mode between ON/OFF/AUTO.
12 SYSTEM OFF button
This button turns off components in two ways.
First, when pressed it will turn off all PIONEER
components. Secondly, any component that has
programmed into the SYSTEM OFF settings will
be turned off.
13 RECEIVER (STANDBY/ON) button
Press to turn power of the receiver on or to
standby (off).
14 MULTI OPERATION button
Use this button to start the multi operation
mode.
15 RECEIVER button
Use this button to switch the remote control into
receiver mode in order to get certain receiver
functions or do receiver setups.
16 TOP MENU/GUIDE button
Use to find stations or menus on a digital TV
tuner. For a DVD player use this button to bring
up the DVD menu.
17 RETURN button
When you are in a receiver setup operation this
button will go back one step in the SYSTEM
SETUP procedure. When you are using your DVD
menu screen this button acts the same as the
Q Q
3 6 7 1 3 1 5
DVD player's "Return" button. When you are
using cable tuners, satellite tuners or digital TV
tuners this button will either exit you from the
menu screen or act like a "Return" button above,
depending on the maker of the unit.
18 INPUT button
Press to select an input source. The button will
cycle through all the possible sources including
USB, PHONO and i.LINK components.
19 VOLUME (+/–) buttons
Use to raise or lower the volume of the receiver.
20 MIDNIGHT button
Switches the MIDNIGHT listening mode on or off.
21 MUTE button
&
Press to mute or restore the volume.
22 MULTI CH INPUT button
Use this button to select the component you
have hooked up to the MULTI CH IN terminals
(for example, a DVD-Audio player).
23 ACOUSTIC CAL button
Press to switch on/off and select the type of
acoustic calibration EQ.
24 REMOTE SETUP button
Use to customize the remote control functions
and the remote control itself. (See "Setting Up
co
the Remote Control to Control Other
Components").
.
VSX-55TXi
7
9 4 2 8
0 5 8 2 9 9 4 2 8
m
8
9 9
A
B
C
9 9
D
E
F
181
8