Ssh - Planet Networking & Communication wgsw-28040 User Manual

The page includes the following fields:
Object
 Telnet Service
 Login Authentication List
 Enable Authentication List
 Session Timeout
 Password Retry Count
 Silent Time
 Current Telent Session
Count

4.9.5.2 SSH

Configure SSH on this Page. This Page shows the Port Security status. Port Security is a module with no direct configuration.
Configuration comes indirectly from other modules - the user modules. When a user module has enabled port security on a port,
the port is set-up for software-based learning. In this mode, frames from unknown MAC addresses are passed on to the port
security module, which in turn asks all user modules whether to allow this new MAC address to forward or block it. For a MAC
address to be set in the forwarding state, all enabled user modules must unanimously agree on allowing the MAC address to
forward. If only one chooses to block it, it will be blocked until that user module decides otherwise.
The SSH Settings and Information screens in
Figure 4-9-21 Telnet Information Page Screenshot
Description
Display the current telent service.
Display the current login authentication list
Display the current enable authentication list
Display the current session timeout.
Display the current password retry count
Display the current silent time
Display the current telnet session count.
Figure 4-9-23 & Figure 4-9-24
213
User's Manual of WGSW-28040
appear.