Specifications - Makita HR4501C Instruction Manual

ENGLISH (Original instructions)
1-1. Switch trigger
2-1. Switch lever
3-1. Adjusting dial
4-1. Change lever
4-2. Pointer
4-3. Lock button
5-1. Change lever
5-2. Pointer
5-3. Lock button
6-1. Change lever
6-2. Pointer
6-3. Lock button
7-1. Change lever
7-2. Pointer
7-3. Lock button

SPECIFICATIONS

Capacities
No load speed (min
Blows per minute
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for hammer drilling in brick, concrete
and stone as well as for chiselling work.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
For Model HR4501C
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Wear ear protection
Explanation of general view
8-1. Change lever
8-2. Pointer
8-3. Lock button
9-1. Power-ON indicator lamp (green)
9-2. Service indicator lamp (red)
11-1. Side handle
11-2. Clamp nut
12-1. Side grip
13-1. Bit shank
13-2. Bit grease
14-1. Bit
14-2. Chuck cover
15-1. Bit
15-2. Chuck cover
16-1. Change lever
Model
Carbide-tipped bit
Core bit
-1
)
Overall length
Net weight
Safety class
) : 94 dB(A)
pA
) : 105 dB(A)
WA
HR4501C
8.2 kg
ENE044-1
Vibration
The vibration
determined according to EN60745:
ENF002-1
Work mode : chiseling function with side handle
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : chiseling function with side grip
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : hammer drilling into concrete
Vibration emission (a
Uncertainty (K) : 1.5 m/s
ENG102-2
For Model HR4510C
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
4
16-2. Pointer
16-3. Lock button
17-1. Pointer
17-2. Change lever
17-3. Lock button
18-1. Change lever
18-2. Pointer
18-3. Lock button
19-1. Pointer
19-2. Change lever
19-3. Lock button
20-1. Depth gauge
20-2. Clamp screw
22-1. Blow-out bulb
HR4510C
45 mm
125 mm
130 - 280
1,250 - 2,750
458 mm
8.9 kg
/II
total value (tri-axial
) : 12.5 m/s
h,CHeq
2
) : 12.5 m/s
h,CHeq
2
2
) : 16 m/s
h,HD
2
) : 93 dB(A)
pA
) : 104 dB(A)
WA
HR4511C
9.0 kg
ENG216-2
vector sum)
2
ENG306-1
2
ENG303-2
ENG102-2