Makita HR4501C Instruction Manual
Rotary hammer
Hide thumbs
Also See for HR4501C:
- Instruction manual (57 pages) ,
- Technical information (23 pages) ,
- Brochure & specs (2 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Instruction Manual
Advertisement
Table of Contents
Related Manuals for Makita HR4501C
Summary of Contents for Makita HR4501C
- Page 1 INSTRUCTION MANUAL Rotary Hammer HR4501C HR4510C HR4511C 008364 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
-
Page 2: Specifications
ENGLISH SPECIFICATIONS Model HR4501C HR4510C HR4511C Carbide-tipped bit 45 mm Capacities Core bit 125 mm No load speed (min 130 - 280 Blows per minute 1,250 - 2,750 Overall length 458 mm Net weight 7.8 kg 8.3 kg 8.4 kg Safety class •... -
Page 3: Specific Safety Rules
operating power tools may result in serious 21. Keep cutting tools sharp and clean. Properly personal injury. maintained cutting tools with sharp cutting edges 10. Use safety equipment. Always wear eye are less likely to bind and are easier to control. protection. -
Page 4: Functional Description
Always be sure you have a firm footing. FOR MODELS HR4510C/ HR4501C Be sure no one is below when using the tool in Trigger switch high locations. CAUTION: Hold the tool firmly with both hands. Before plugging in the tool, always check to see •... - Page 5 Use a bull point, cold the speed adjusting function may no longer work. chisel, scaling chisel, etc. For long time hammering (FOR MODELS HR4501C Selecting the action mode AND HR4510C ONLY) Rotation with hammering 1. Change lever HR4501C 1.
- Page 6 Side handle CAUTION: Do not rotate the change lever when the tool is • running under load. The tool will be damaged. To avoid rapid wear on the mode change • mechanism, be sure that the change lever is always positively located in one of the two or three action mode positions.
- Page 7 Installing or removing the bit Bit angle (when chipping, scaling or demolishing) 1. Bit shank 2. Bit grease 1. Change lever HR4501C 2. Pointer HR4510C 3. Lock button 003150 008362 Clean the bit shank and apply bit grease before installing the bit.
-
Page 8: Operation
Do not force the tool. Light or maintenance. pressure gives best results. Keep the tool in position and This servicing should be performed by Makita • prevent it from slipping away from the hole. Authorized Service Centers only. - Page 9 Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. SDS-Max Carbide-tipped bits • SDS-Max bull point • SDS-MAX cold chisel •...
- Page 12 Makita Corporation 884742-2...