Pair Your Phone; Pair To Mobile Device; Nfc Pairing; Pair Another Device - Plantronics Voyager 5200 Series User Manual

Pair your phone

Pair to mobile device

NFC pairing

Pair another device

The first time you power on the headset it begins the pairing process. Put on your headset and you
1
will hear "pairing" and the headset LEDs flash red and blue.
Activate Bluetooth on your phone and set it to search for new devices.
2
• iPhone Settings > Bluetooth > On*
• Android Settings > Bluetooth: On > Scan for devices*
NOTE
*Menus may vary by device.
Select "PLT V5200 Series."
3
If necessary, enter four zeros (0000) for the passcode or accept the connection.
Once successfully paired, you hear "pairing successful" and the headset LEDs stop flashing.
NOTE
Your headset can pair with up to 8 devices but only maintain 2 connections simultaneously;
this includes the Bluetooth USB adapter.
NFC pairing is an option to pair your phone if there are one or less devices already connected. NFC
pairing will not work if there are two devices connected already.
Ensure NFC is on and your phone's display is unlocked. (Phones may vary.)
1
With the headset powered on, lay the headset on the back of phone near the NFC tag on phone as
2
shown until NFC pairing completes. If necessary, accept the connection.
With the headset powered on press and hold the Call
1
While the headset LEDs are flashing blue and red, activate Bluetooth on your phone and set it to
2
search for new devices.
Select "PLT V5200 Series."
3
Once successfully paired, indicator lights stop flashing and you hear "pairing successful."
button until you hear "Pairing."
10