Table of Contents
Advertisement
•
Connect to a properly grounded outlet only. See
"Grounding Instructions. "
•
Turn off all controls before unplugging.
•
When using an extension cord, use a 3 conductor
grounding cord, 12 gauge wire or heavier.
•
Do not put any object into openings. Do not use with
any opening blocked. Keep free of dust, lint,
•
hair and anything that may reduce air flow.
•
Do not operate machine in flammable or explosive ar-
eas.
•
All servicing of EDIC's equipment should be per-
formed by a EDIC authorized service center.
•
Keep hair, loose clothing, fingers and all parts of body
away from openings and moving parts.
•
Use extra care when cleaning near stairs.
•
To reduce the risk of fire use only commercially avail-
able floor cleaners and waxes intended for machine
application.
•
Risk of explosion - Electrical motors and components
can cause an explosion when operated near volatile
materials and vapors. Do not use this machine near
flammable materials such as solvents, thinners, fuels,
grain dust, etc.
ELECTRICAL - 115 Volt
Model: ALL LISTED ON COVER WITHOUT "-220V"
This machine is designed to operate on a standard 15
amp, 120 volt, 60 Hz, AC circuit. Voltages below 105 volt
AC or above 125 volts AC could cause serious damage to
the motor.
ELECTRICAL - 240 Volt
Model: ANY MACHINES WITH A "-220V" AT THE
END OF MODEL NUMBER
This machine is designed to operate on a standard 8.3
amp type L fused 230 volt, 50 Hz, AC circuit. Voltages
below 200 volt AC or above 250 volts AC could cause
serious damage to the motor.
GROUNDING INSTRUCTIONS:
This piece of equipment must be grounded. Should an
electrical malfunction occur, grounding provides a path
of least resistance for electrical current- reducing the risk
of electric shock. This piece of equipment is furnished
with a cord that has a grounding conductor and ground-
ing plug. The grounded plug must only be plugged
into an appropriate outlet that is properly installed and
grounded in accordance with all local codes and ordi-
nances.
WARNING:
Connecting the equipment to an improperly grounded
outlet can result in an increased risk of electric shock. A
qualified electrician should be consulted if you are unsure
that the outlet is properly grounded. Do not modify the
plug provided with the equipment. If it will not fit the
outlet, have a proper outlet installed by a qualified electri-
cian.
This appliance is designed for use on a 120-volt circuit.
The grounding plug provided looks like the plug illustrat-
ed in Figure 1. Replace the power cord if the grounding
pin is damaged or broken.
Extension cords connected to this machine should be 12
gauge, three-wire cords with three-prong plugs and out-
lets. DO NOT use extension cords more than 25 feet
(7.6 m) long
Figure 1
.
4
Advertisement
Table of Contents
