Gigaset S820 Manual page 27

Dialling with Contacts
Menu key v ¤
œ
¤
Scroll through the contacts until the desired entry appears
You have the following options:
¤ Press c to dial the number marked in green
- There is only one number saved: the number is dialled immediately
- There is more than one number saved: the detail view opens
¤
Press c. The number with the green dot is dialled
Or:
¤
Touch the desired number
Or:
¤
Touch the name of an entry to open the detail view
¤ Press c. The number of the entry marked with the green dot is dialled
Or:
¤
Touch the desired number
Configuring/selecting QuickDial
Prerequisite: the contacts must contain at least one number.
¤
Menu key v
menu page Settings
If no numbers have been saved:
¤ ¤
Contacts opens
If a number has already been saved:
¤
Delete the number: þ
¤
Change the number: Edit
Select number: press and hold the corresponding key in idle status.
Please note
If you change/delete a number from the contacts, the same number is automatically deleted
from the QuickDial list.
One-touch call
You can set your phone to dial a previously stored number when you touch any key. This enables
children who are still too young to enter a number to call a specific number, for example.
Menu key v ¤
T
One Touch Call
¤
Touch f. Enter the number you wish to call or edit a stored number.
¤
Activate one-touch call with on.
If no number has been saved yet, the menu for entering a number is opened. The one-touch
call function appears on the display when it is activated
The previously stored number is selected by touching any key. Press the end call key a to cancel
dialling.
Exit one-touch call mode: press and hold # key.
da en fi no sv
Contacts
¤
¥ QuickDial
Select a number
¤
Contacts opens
¤
Touch the desired QuickDial key.
¤
Select a number
Making calls
¤
Press è .
25