Prc-1 Remote Control - Russound PR-4Z Instruction Manual

PRC-1 REMOTE CONTROL

The Russound PRC-1 remote control is preprogrammed to
operate over 1000 Audio and Video components, including
the PR-4Z. Set it up by simply punching in a three digit code
number that matches your equipment. The PRC-1 also has
the ability to learn new functions from your original remote
controls, allowing you to customize the remote to your own
needs and update it as you add new equipment. The PRC-1
operates up to eight different audio and video devices in
your home entertainment system and has the 5 available
macros.
Figure 25 – PRC-1 Preprogrammed & Learning Remote
Control
P
ERIPHERAL
PROGRAMMING FOR PR-4Z FUNCTIONS
Program the remote by first turning on the PR-4Z manually.
Press the PR-4Z (AUX) and MUTE buttons simultaneously to
get the SET prompt. Point the remote toward the PR-4Z and
press the three digit code 081. Press the PR-4Z (AUX) button
again to store the code.
If there is difficulty programming the PRC-1 Remote Control
with the standard 081 Russound IR Code in the PR-4Z (AUX)
position, the code may be found in another location. Code
267 in the AUD position will also control Russound products.
This code can be moved to the PR-4Z (AUX) location. The
following describes how to do this.
The 267 code is programmed into the AUD position by press-
ing AUD and MUTE simultaneously to get the SET prompt.
Then enter 267, press AUD and the remote will show STORE.
To move the code to the PR-4Z (AUX) position, press PR-4Z
(AUX) and MUTE simultaneously to get the SET prompt.
Press AUD, enter 267 then press PR-4Z (AUX). The remote
will give the STORE indication on the display showing that
the 267 code in the AUD bank has been stored into the AUX
position.
OPERATING THE PR-4Z WITH THE REMOTE
Pressing the PR-4Z button in the upper right corner of the
remote accesses all the preprogrammed codes for the PR-4Z.
All the functions available on the PR-4Z Keypad are available
on the remote. Note: The remote will only control the zone
you are in.
The remote is capable of controlling source selections on the
PR-4Z by pressing one of six source buttons. Pressing these
buttons will change the input on the PR-4Z. The remote can
also control bass, treble, volume and "loudness" for the zone
you are in. The loudness button provides more bass and tre-
ble at lower volume levels for a fuller, richer sound. The
remote can turn on the zone you are in by pressing the
POWER button, and turn off that zone by pressing the
MUTE button. The remote also has buttons to turn on and
off all zones.
D
EVICES
15