Table of Contents
Advertisement
Flashes when sending/receiving data.
Lit when connected to an Ethernet device.
LAN
Green for 100Mbps; Orange for 10Mbps.
Blinking when data is Transmitted / Received.
Lit when successfully connected to an ADSL DSLAM
ADSL
("linesync").
PPP
Lit steady when there is a PPPoA / PPPoE connection.
2.3 The Rear Ports
Ports
ADSL(Line)
LAN
Reset
POWER (jack)
POWER (Switch)
Meaning
Connect the supplied RJ-11 ("telephone") cable to this
port when connecting to the ADSL/telephone network.
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one
of the four LAN ports when connecting to a PC or an
office/home network of 10Mbps or 100Mbps.
After the device is powered on, press it to reset the
device or restore to factory default settings.
•
0-3 seconds: reset the device
•
3-5 seconds: no action
•
Over 10 seconds: restore to factory default
settings (this is used when you can not login to
the router, e.g. forgot the password).
Connect the supplied power adapter to this jack.
A Power ON/OFF switch.
A02-RA141-W54
WebShare 141W
Pag. 7
Advertisement
Table of Contents
