Important Safety Instructions - JUKI MO-50e Instruction Manual

"IMPORTANT SAFETY INSTRUCTIONS"

When using an electrical appliance, basic safety precautions should always be followed, including the following:
Read all instructions brfore using this overlock sewing machine.
"DANGER"___
1. The appliance should never be left unattended when plugged in.
2. Always unplug this appliance from the electric outlet immediately after using and before cleaning.
3. Always unplug before re-lamping. Replace bulb with same type rated max. 110V~230V/15W.
"WARNING"___
1. Do not allow this appliance to be used as a toy. Close attention is necessary when this appliance is used by
or near children and infim persons.
2. Use this appliance only for its intended use as described in this manual. Use noly attachments recommended
by the manufacturer as contained in this manual.
3. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been
dropped or damaged, or dropped into water. Retum the appliance to the nearest authorized dealer or service
center for examination, repair, electrical or mechanical adjustment.
4. Never operate the appliance with any air openings blocked. Keep ventilation openings of the sewing machine
and foot control free from the accumulation of lint, dust, and loose cloth.
5. Keep fingers away from all moving parts. Special care is reqired around the sewing machine needle and knife.
6. Always use the proper stitch plate. The wrong plate can cause the needle to break.
7. Do not use bent needles.
8. Do not pull or push fabric while stitching. It may deflect the needle causing it to break.
9. Switch the sewing machine off " O " when marking any adjustments in the needle area, such as threading
needle area, such as threading needle, changing needle, threading looper, or changing presser foot and the
like.
10.Always unplug the machine from the electrical outlet when removing covers, when covers are opened to raise
the knife or thread the loopers, when lubricating or when making any other user servicing adjustments
mentioned in the instruction manual.
11.Never drop or insert any abject into any opening.
12.Do not use outdoors.
13.Do not operate where aerossl (spray) products are being used or where oxygen is being administered.
14.To disconnect, tum all controls to the off " O " position, then remove plug from outlet.
15.Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
16.Basically, the machine shouldbe disconnected from the electricity supply when not in use.
17.If the power cord of this appliance is damaged, it must be replaced with a special cord by your nearest
authorized dealer or service center.
18.This appliance is provided with double insulation. (except USA/ CAN)
Use only identical replacement parts. See instructions for servicing double insulated appliances.
19.If oil gets in eyes, immediately, nnse the oil out with water. If you swallow oil by mistake, immediately consult
a medical doctor.
20.Close cover before operating machine.
"SERVICING DOUBLE-INSULATED PRODUCTS
(USA and Canada version excepted)"
In a double-insulated product, two systems of insulation are provided instead of grounding. No grounding means
is provided on a double-insulated product nor should a means for grounding be added to the product. Servicing
a double-insulated product requires extreme care and knowledge of the system and should and only be done by
qualified service personnel. Replacement parts for a double-insulated product must be identical to those parts in
the product. A double-insulated product is marked with the words DOUBLE INSULATION or
DOUBLE INSULATED.
The symbol may also be marked on the product.
"SAVE THESE INSTRUCTIONS"
"This overlock sewing machine is intended gor household use only."
To reduce the risk of electric shock:
To reduce the risk of burns, fire, electric shock, or injury to persons:
1