Video; Divx Video; Time Access; Diagnostics On Digital Tv Channels - JVC LT-40HW62U User Manual

4. Press the related buttons on the remote control
to perform the available functions shown on the
function bar at the bottom of the TV screen.

Video

Use this function to watch videos, if available.
1. Select Media > Video, then press OK to enter the
main file content browser.
2. Use ▲/▼/◄/► to select a video in either main
or sub file content browser in the same way as in
photo display function, press MENU to display the
video menu in folder mode.
- Sort: Sort folders and videos by Type,
modification Date or Name.
- Edit: Copy, paste or delete a selected video.
- Parser: You can select Recursive to display
videos from all sub file folders.
3. Select a video, press OK to watch, and automatic
playback begins from the selected video. Press
MENU to display the video menu in the browser
mode. You can play or pause the video, select
different play modes, screen modes and preset
picture settings, etc.
4. Press the related buttons on the remote control
to perform the available functions shown on the
function bar at the bottom of the TV screen. Press
the INFO button to show or remove the function
bar.

DivX video

ABOUT DIVX VIDEO: DivX® is a digital video
format created by DivX, LLC, a subsidiary of Rovi
Corporation. This is an official DivX Certified®
device that plays DivX video. Visit divx.com for more
information and software tools to convert your files
into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certified® device must be registered in order to play
purchased DivX Video-on-Demand (VOD) movies.
Obtain your registration code:
• Press MENU on the remote control.
• Select Settings > DivX(R) registration.
• Press OK/► and your registration code will be
displayed.
Go to vod.divx.com for more information on how to
complete your registration.
Deregister your TV:
If you wish to deregister your TV,
• Press MENU on the remote control.
• Select Settings > DivX(R) deregistration.
• Press OK/► and a message will guide you.
DivX®, DivX Certified®, DivX Plus® HD and
associated logos are trademarks of Rovi Corporation
or its subsidiaries and are used under license.

Time access

You can access the time from digital channels
following the instructions below.
1. Press MENU on the remote control and
select Settings > Timer > Clock > Auto
synchronization.
2. Press ◄/► to select On.
To set the time manually, switch off the Auto
synchronization.

Diagnostics on digital TV channels

1. Press MENU on the remote control and select
Settings > Setup > Diagnostics.
2. Press OK/► to display some signal information on
the current digital channel, such as signal strength,
frequency, etc.

Time shift

Allows you to record the TV programme so that you
will not miss the favourite part even if you go out.
Before you use the function, connect a USB drive to
the TV first. For the first time, you should do the disk
setup for the USB drive.
Note: This feature is available only in selected
products and, due to specific TV
network limitations and country technical
requirements, might not be available in
product or place of installation. This feature
might also be blocked by TV network due to
copyright protection (HD content, recording
protection). Please use OPTION on the
remote control to check if this feature is
available in your product.
1. Press MENU on the remote control and select
Settings > Setup > Time shift.
2. Press ◄/► to select On to switch on the time shift
function, then press EXIT to close the menu.
3. Press OPTION on the remote control and select
Time shift, then press OK to confirm.
4. Follow the directions on the screen to do the setup.
5. After the disk setup is done, press OPTION and
select Time shift.
6. Press OK to display the time shift menu.
- Press the pause button
and begin the time shift.
- Press the pause button
part.
- When the time shift menu disappears and only
the timing of the time shift remains on the screen,
you can press the pause button
access the time shift menu.
- Press the fast backward button◄◄ to fast
backward or the fast forward button ►► to fast
forward.
- Press the stop button
function.
EN 14
Using more of your TV
to pause the picture
to play the recorded
or OK to
to quit the time shift