Phonebook - Panasonic KX-TGE463 Operating Instructions Manual

Phonebook

Phonebook
You can add 3,000 names (16 characters
max.) and phone numbers (24 digits max.) to
the phonebook, and assign each phonebook
entry to the desired group (page 35). The
following groups are available:
*1
– Group 1: "Home" (default)
– Group 2: "Cell 1"
– Group 3: "Cell 2"
– Group 4-9: You can change the group
name for each group.
*1 For groups 1-3, the group names cannot
be changed.
Important:
R All entries can be shared by any registered
handset.
R You can copy phonebook entries from a
Bluetooth cellular phone to the unit's
phonebook (page 53).
Adding phonebook entries
1
MFN W a MMENUN
2
MbN: "Add new entry" a MSELECTN
3
Enter the party's name. a MOKN
4
Enter the party's phone number. a MOKN
5
MbN: Select the desired group. a
MSELECTN 2 times a MOFFN
Note:
R In step 3, you can switch the language for
entering characters.
# a MbN: Select the desired language. a
MOKN
Entering characters
Press the dial key that corresponds to the
desired character. Press repeatedly to scroll
through the available characters.
The following operations are also available.
Key Operation
* Switch between the
uppercase and lowercase
(A « a)
For assistance, please visit http://shop.panasonic.com/support
34
TGE46x47x(en)_1117_ver061.pdf
*1
*1
34
Key Operation
MFN MEN Move the cursor
MCLEARN Erase the character or number
R To erase all, press and
hold it.
R To enter another character that is located
on the same dial key, first press MEN to
move the cursor to the next space.
R If you do not press any dial key within 2
seconds after entering a character, the
character is fixed and the cursor moves to
the next space.
Storing a redial list number to the
phonebook
Phone numbers of up to 24 digits can be
stored in the phonebook.
n When a cellular phone is paired:
1
MEN REDIAL
2
MbN: Select the desired entry. a
MMENUN
3
MbN: "Save" a MSELECTN
4
To store the name, continue from step
3, "Editing entries", page 36.
n When a cellular phone is not paired:
1
MEN REDIAL
2
MbN: Select the desired entry. a
MSAVEN
3
To store the name, continue from step
3, "Editing entries", page 36.
Note:
R The name stored in the phonebook will be
reflected in the redial list after you make a
call using that phonebook entry.
Storing caller information to the
phonebook
n When a cellular phone is paired:
1
MCN CID
2
MbN: Select the desired entry. a
MSELECTN
R To edit the number, press * (Edit)
repeatedly until the phone number
is shown in the desired format.
2015/11/17 15:14:14